Housing: Formed 16 ga. stainless steel enclosure with integral hinge. Cover is secured with two stainless steel screws. A through hole is provided in the bottom edge for a padlock (by others). 1/2" knockouts on each side of the enclosure are provided for hardwiring or accessory photocell mounting
Wall Plate: 80-amp euro-style terminal block.
Gasketing: Six foot, heavy duty outdoor power cord is provided and installed.
Socket: 25 amp magnetic circuit breaker (1) per circuit
Wiring: Core and coil type fully epoxy encapsulated. Output is multi-tap 12V / 13V / 14V / 15V. The 200 and 300-watt units have single circuit output, the 600-watt unit has two circuits for output, and the 900-watt unit has three circuits for output. Variable taps provide flexibility in system design with the 12-volt tap for fixtures near the transformer location and higher voltages for more remote fixtures.